1. Zobrazenie ŠPZ a čísla garáže
Tu je oprava jednoduchá. Do skritpu MAN_D86_main_AI.osc dopíšte
- Kód: Vybrat vše
(L.$.SPZ_DPP) "" $=
{if}
(M.L.SPZ_DPP_MOD)
{endif}
napr. za riadok (S.L.Debug_5). ŠPZ to nahodí síce až pri zmene cieľa, ale lepšie ako nič.
2. Podsvietené vonkajšie BUSE panely v noci
Opäť postačí jednoduchá úprava skriptu v tomto prípade lights.osc.
Nájdeme odstavec
- Kód: Vybrat vše
(L.L.AI_Light)
{if}
(L.L.AI_Engine) 0.5 >
{if}
(L.L.AI_Light) 0.75 >
{if}
1
{else}
0.5
{endif}
(S.L.cp_schluessel_rot)
(L.L.AI_Light) 1.5 > (S.L.lights_sw_fern)
{else}
0.5 (S.L.cp_schluessel_rot)
{endif}
{else}
0 (S.L.cp_schluessel_rot) (S.L.lights_sw_fern)
{endif}
A zmeníme ho nasledovne:
- Kód: Vybrat vše
(L.L.AI_Light)
{if}
1 (S.L.BUSE_svetlo)
(L.L.AI_Engine) 0.5 >
{if}
(L.L.AI_Light) 0.75 >
{if}
1
{else}
0.5
{endif}
(S.L.cp_schluessel_rot)
(L.L.AI_Light) 1.5 > (S.L.lights_sw_fern)
{else}
0.5 (S.L.cp_schluessel_rot)
{endif}
{else}
0 (S.L.cp_schluessel_rot) (S.L.lights_sw_fern) (S.L.BUSE_svetlo)
{endif}
3. Oprava chovania dverí v AI
V tomto prípade sa bude úprava týkať skriptu door_nd.osc
Nájdeme odstavec:
- Kód: Vybrat vše
'----------------------
' AI-Ablauf:
(L.L.AI_Scheduled_AtStation) s0
1 =
{if}
'Wenn Türen geöffnet werden sollen:
(L.L.Velocity) 3 <
{if}
'Nur, wenn v < maxkmh, sonst warten
'Taster jeweils nur betätigen, falls noch nicht an
(L.L.doorTarget_23) ! (L.L.haltewunsch) &&
{if}
(M.L.trg_bus_doorback2)
{endif}
(L.L.doorTarget_23) ! (L.L.haltewunsch) ! &&
{if}
(M.L.trg_bus_doorback2)
2 (S.L.AI_123)
{endif}
(L.L.doorTarget_0) ! (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorfront0)
{endif}
(L.L.doorTarget_1) ! (L.L.door_AI_timer) 0.6 > &&
{if}
(M.L.trg_bus_doorfront1)
{endif}
{else}
0 (S.L.door_AI_timer)
{endif}
(L.L.door_AI_timer) (L.S.Timegap) + (S.L.door_AI_timer)
{else}
l0 -1 =
{if}
1 (S.L.AI_123)
'Wenn Türen geschlossen werden sollen:
'Taster jeweils nur betätigen, falls noch nicht aus:
(L.L.doorTarget_1)
{if}
(M.L.trg_bus_doorfront1)
0 (S.L.door_AI_timer)
{endif}
(L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorfront0)
{endif}
'Haltestellenbremse erst wegnehmen, wenn alle Türen zu. Dann auch erst den Bus AI-mäßig freigeben:
(L.L.door_0) 0.1 <
(L.L.door_1) 0.1 < &&
(L.L.door_2) 0.1 < &&
{if}
(L.L.doorTarget_23) (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorback2)
{endif}
(L.L.doorTarget_23) !
{if}
0 (S.L.AI_Scheduled_AtStation)
{endif}
{else}
'Sollte eine der Türen auf sein und die Haltestellenbremse aus, dann sofort diese einlegen
(L.L.doorTarget_23) ! (L.L.haltewunsch) &&
{if}
(M.L.trg_bus_doorback2)
{endif}
(L.L.doorTarget_0) !
(L.L.doorTarget_1) ! &&
{if}
0 (S.L.door_AI_timer)
{endif}
{endif}
(L.L.door_AI_timer) (L.S.Timegap) + (S.L.door_AI_timer)
{endif}
{endif}
(L.L.doorTarget_23) (L.L.ai) (L.L.AI_123) 2 = && &&
(L.L.AI_Scheduled_AtStation) -1 = (L.L.AI_123) 1 = && ||
{if}
(L.L.haltewunsch) !
{if}
(L.L.doorAftLastOpen) (L.S.Timegap) + (S.L.doorAftLastOpen)
(L.L.doorAftLastOpen) (C.L.doorAftOpenTime) > &&
{if}
(T.L.ev_doortriggerclose_2)
0 (S.L.doorTarget_23)
(C.L.door_druckluft)
{if}
(L.L.bremse_p_Tank04) 100000 - 0.96 * 100000 + (S.L.bremse_p_Tank04)
0 (S.L.AI_123)
{endif}
{endif}
{endif}
{else}
0 (S.L.doorAftLastOpen)
{endif}
A prepíšeme ho týmto:
- Kód: Vybrat vše
'----------------------
' AI-Ablauf:
(L.L.AI_Scheduled_AtStation) s0
1 =
{if}
'Wenn Türen geöffnet werden sollen:
(L.L.Velocity) 3 <
{if}
'Nur, wenn v < maxkmh, sonst warten
'Taster jeweils nur betätigen, falls noch nicht an
(L.L.doorTarget_0) ! (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorfront0)
{endif}
(L.L.doorTarget_1) ! (L.L.door_AI_timer) 0.1 > &&
{if}
(M.L.trg_bus_doorfront1)
{endif}
(L.L.doorTarget_23) ! (L.L.door_AI_timer) 0.6 > &&
{if}
(M.L.trg_bus_doorback2)
{endif}
{else}
0 (S.L.door_AI_timer)
{endif}
(L.L.door_AI_timer) (L.S.Timegap) + (S.L.door_AI_timer)
{else}
l0 -1 =
{if}
'Wenn Türen geschlossen werden sollen:
'Taster jeweils nur betätigen, falls noch nicht aus:
(L.L.doorTarget_1)
{if}
(M.L.trg_bus_doorfront1)
0 (S.L.door_AI_timer)
{endif}
(L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorfront0)
{endif}
(L.L.doorTarget_23) (L.L.door_AI_timer) 0.3 > &&
{if}
(M.L.trg_bus_doorback2)
{endif}
1 (S.L.zvonek_volume)
'Haltestellenbremse erst wegnehmen, wenn alle Türen zu. Dann auch erst den Bus AI-mäßig freigeben:
(L.L.door_0) 0.1 <
(L.L.door_1) 0.1 < &&
(L.L.door_2) 0.1 < &&
(L.L.door_3) 0.1 < &&
(L.L.door_4) 0.1 < &&
{if}
0 (S.L.AI_Scheduled_AtStation) (S.L.zvonek_volume)
{endif}
{else}
'Sollte eine der Türen auf sein und die Haltestellenbremse aus, dann sofort diese einlegen
(L.L.doorTarget_0) !
(L.L.doorTarget_23) !
{if}
0 (S.L.door_AI_timer)
{endif}
{endif}
(L.L.door_AI_timer) (L.S.Timegap) + (S.L.door_AI_timer)
{endif}
{endif}
Týmto sa pri zatváraní dverí rozsvieti aj výstraha.
Čo sa týka nedobrzďovania, to sa prejavuje len v prípade, že sa do AI prepnete, ale ešte neprevezmete riadenie. Inak je všetko v poriadku.
Nezabudnite tiež, že skripty bude potrebné upraviť zvlášť pre B951 a zvlášť pre B951E, keďže majú samostatné priečinky.